MEGGER MJ459 CALIBRATION and MEGGER MJ459 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the MEGGER MJ459 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

 

 
   MEGGER MJ459 (212459)   Description / Specification:    
MEGGER MJ459 100/250/500/1000 V Insulation Tester

The Megger MJ459 insulation tester is designed to give rapid, accurate and direct measurement of continuity and insulation resistance of domestic and industrial wiring, cables, transformers, motors, generators electrical machinery and appliances.
It is self-powered, and is suitable for use during installation and commissioning work as well as for service and maintenance applications.
Specifications.

Insulation Range.
Insulation Resistance: 0.1Ω - 2000 MΩ.
Nominal Test Voltages dc: 100 V, 250 V, 500 V, 1000 V.
Accuracy: 250 V, 500 V, 1000 V +30%, -0% maximum; 100 V, +40%, -0% maximum.
Midscale: 4 MΩ.
Short Circuit Current: 1.9 mA.
Accuracy: ±1.25% of fsd on a 2.8 in. (71.1mm) arc length: [0.035 in. (0.9mm)].

Resistance Range.
Range: 0.1Ω - 5000Ω.
Open circuit Test voltage: 3 V ±0.2 V.
Short Circuit Current: 2 mA ±10%.
Accuracy: ±1.25% of fsd on a 2.8 in. (71.1mm) arc length: [0.035 in. (0.9mm)].
Maximum Load Capacitance: 1μF with less than ±0.1” pointer movement.
Discharge: Up to 1μF capacitance is discharged from 1000V to less than 42.4 V in less than 4 seconds.

Safety Voltage Check.
Voltage measurement: 0.1 V - 600 V ac; the meter is RMS calibrated and average responding.
Safety voltage indicator: Indicates the presence of dc voltages, scaling is not the same as the ac meter; true dc voltage equals scale reading divided by 2.22.
Accuracy: 2.5% of full scale.

Power Supply.
Six IEC LR6 cells (AA) .
Battery life: not less than 1300 insulation or Resistance range tests.



 

Standard Calibration $270.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the MEGGER MJ459. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Bench Equipment Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Carrier Wave (CW)
Carrier Wave or Continuous Wave is a sinusoidal signal without modulation.

Harmonic
A harmonic of a wave is a component frequency of the signal that is an integer multiple of the fundamental frequency, i.e. if the fundamental frequency is f, the harmonics have frequencies 2f, 3f, 4f, . . . etc.

Noise Floor
Noise floor is the measure of the signal created from the sum of all the noise sources and unwanted signals within a measurement system.

Ripple
Ripple is the small unwanted residual periodic variation of the direct current (dc) output

Please contact us for your MEGGER MJ459 CALIBRATION and/or MEGGER MJ459 100/250/500/1000 V Insulation Tester REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: